Isovibe SX for VR1

- Remove this product from my favorite's list.
- Add this product to my list of favorites.
- Send to a friend
Isovibe SX for VR1
Isovibe SX for the VR1 Polaris. Does not fit on older Polaris models. Does not work with after market risers. DOES NOT WORK WITH POLARIS HANDGUARDS because there is not enough clearance between the isovibe bolt and the handle bar to put the Polaris hand guards on.
Designed for the stock 6mm bolts that is stock on the riser block
To check if this isovibe works on your sled and that you have 6mm bolts use this link:
https://snowmobiles.polaris.com/en-us/shop/maintenance/
Select your year and model
Select service & replacement parts
Select handlebar assembly/upper
Then check what size bolts are used in the riser block
IRON DOG RACE SLED USES THIS STYLE ISO
New Isovibe SX model designed for snowcross racers and aggressive trail/standup riders. New bushing design absorbs vibration just like the original Isovibe but takes shock absorption to a new level. The new design absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side direction. It took two years and 4 different prototypes to come up with the correct balance of front to back and side to side deflection.
The main goal for this design was to absorb the shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps with one ski. If you've even landed a jump wrong on one ski you've experienced the side to side impact to your wrists that sometimes rips the bars out of your hands. This new Isovibe SX will absorb this impact and keep you in control.
The Isovibe SX has the following features:
- Will raise your bars by 1.5" or 2.5" over stock depending on how you mount it. If you want to keep your stock handle bar height shorter riser blocks are available from your dealer.
- Retains the ability to articulate your bars forward or rearward.
- Adjustable handle bar deflection - simply add or remove shims between the bushings to increase or decrease the side to side deflection. Add or remove shims on the top and bottom sides of the bushings to increase or decrease the front to back deflection. Optional durometer bushings will be available to fine tune your Isovibe SX to your personal preference
- Powder coated Black.
No customer comments for the moment.