Wishlist
New products
Clutch Parts, QRS Rollers There are 10 products.
AvailableHi Torque QRS Clutch...
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven Clutch/Secondary Clutch HTR thermoset composite secondary clutch roller kit. Hi-Torque Rollers for the Ski Doo QRS clutch are up to 40% stronger than stock and are also far more impact resistant. Hi-Torque’s roller design uses a precision pin fit, which along with a friction-reducing stainless steel thrust washer, delivers a more stable shift than stock rollers. The result of this...
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven Clutch/Secondary Clutch HTR...
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven Clutch/Secondary Clutch HTR thermoset composite secondary clutch roller kit. Hi-Torque Rollers for the Ski Doo QRS...
AvailableSkidoo Pivot Stud
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style roller bolt. New genuine Skidoo part. Comes with circlip.
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style...
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style roller bolt. New genuine Skidoo part. Comes with circlip.
AvailableQRS Bearing Puller
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS Secondary Clutches from 2008 to current Ski-Doo snowmobiles. The threaded rod IS NOT included with this bearing puller. Customer will need to purchase the threaded rod, nuts & washers. By doing this, the customer will save on the increased shipping charges. Detailed instructions on what to purchase as well as bearing removal are included. The...
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS...
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS Secondary Clutches from 2008 to current Ski-Doo snowmobiles. The threaded rod IS NOT...
Available850 MXZ/Renegade...
Sled Head Racing 850 MXZ Renegade Clutch kit. Comes with everything show in picture. Primary and secondary springs, adjustable weights (tip and bolt weight), overdrive governor spring cup, tools to compress the clutch in the sled to remove or adjust weights. Clutch pin removal tool and allen wrenches. Enables you to still use the stock clickers to fine tune RPM.Works with stock pipe and aftermarket pipe.Here are 10 simple practices to...
Sled Head Racing 850 MXZ Renegade Clutch kit. Comes with everything show in picture....
Sled Head Racing 850 MXZ Renegade Clutch kit. Comes with everything show in picture. Primary and secondary springs, adjustable weights (tip and bolt weight), overdrive...
Available850 Summit/Backcountry...
Sled Head Racing 850 Backcountry/Summit Clutch kit for low elevation. If using for Hi Elevation we can substitute a high alt primary spring. Comes with everything show in picture. Primary spring, adjustable weights (tip and bolt weight), overdrive governor spring cup, tools to compress the clutch in the sled to remove or adjust weights. Clutch pin removal tool and allen wrenches. Enables you to still use the stock clickers to fine tune...
Sled Head Racing 850 Backcountry/Summit Clutch kit for low elevation. If using for Hi...
Sled Head Racing 850 Backcountry/Summit Clutch kit for low elevation. If using for Hi Elevation we can substitute a high alt primary spring. Comes with everything show in...
AvailableQRS Ratchet Wrench
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to current ski doo secondary clutches without the need to remove your secondary clutch/shaft. The wrench is just over 12 inches long and has a ratchet on each end. The end is 12 mm. The opposite end is 13 mm. The wrench includes a T-40 torx bit that will not fall out of the wrench.
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in...
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to current ski doo secondary clutches without the need to remove your secondary...
AvailableQRS Shaft Bearing
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the...
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
AvailableDrive Shaft Bearing
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on both sides of the drive shaft. Brake side and chain case side.Sold individually.
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on...
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on both sides of the drive shaft. Brake side and chain case side.Sold individually.
AvailableG5/LYNX CHAIN CASE...
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick release 2 piece hub on the new Ski doo G5 driveshaft. ***This retainer is for Skidoo G5 with Chaincase only. TKI G5 Belt Drive does come with the appropriate retainer for the belt drive application. This kit also includes chain case oil!comes in a 10 oz bottle *** see below about the 10 oz oil provides low non-channeling point non-foaming water resistant...
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick...
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick release 2 piece hub on the new Ski doo G5 driveshaft. ***This retainer is for Skidoo G5 with...
AvailableG5/LYNX DRIVESHAFT...
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick release 2 piece hub on the new Ski doo G5 driveshaft. ***This retainer is for Skidoo G5 with Chaincase only. TKI G5 Belt Drive does come with the appropriate retainer for the belt drive application. https://tkicnc.com/wp-content/uploads/2023/02/G5-Retainer-Instructions.pdf https://studio.youtube.com/video/7uLjg-7oLDs/edit
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick...
Drive shaft retainer plug with speed sensor used to eliminate slop in the OEM quick release 2 piece hub on the new Ski doo G5 driveshaft. ***This retainer is for Skidoo G5 with...
