Wishlist
New products
Isovibes, Steering, Controls There are 7 products.
AvailableISO G4/G5 for standard...
DOES NOT FIT ANYTHING BUT THE GEN4/5 DOES NOT FIT G4/5 WITH ADJUSTABLE RISER Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side direction. The main goal for this design was to absorb the shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps with one ski. If you've even landed a jump...
DOES NOT FIT ANYTHING BUT THE GEN4/5 DOES NOT FIT G4/5 WITH ADJUSTABLE RISER Skidoo...
DOES NOT FIT ANYTHING BUT THE GEN4/5 DOES NOT FIT G4/5 WITH ADJUSTABLE RISER Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just like the original...
AvailableISO G4/G5 for adj riser
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable riser. Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side direction. The main goal for this design was to absorb the shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps with one ski. If you've even...
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable...
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable riser. Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just...
AvailableIsovibe SX Red...
Isovibe SX Standard 80 durometer Red replacement bushings.
Isovibe SX Standard 80 durometer Red replacement bushings.
Isovibe SX Standard 80 durometer Red replacement bushings.
AvailableIsovibe SX Blue...
Isovibe SX Optional 85 Durometer Blue harder bushings.
Isovibe SX Optional 85 Durometer Blue harder bushings.
Isovibe SX Optional 85 Durometer Blue harder bushings.
AvailableG4/G5 extended...
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from end to end. Measured from housing end to housing end the measurement is approximately 31 1/2". Good for use with our isovibe or taller riser when your cable gets too tight. This is a genuine BRP part. BRP part # 512061175 This is not longer than the Summit cable. It is about the same length. But is longer than other stock cables for G4/G5.
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from...
Extended length throttle cable for G4/G5. Cable is approximately 35" long measured from end to end. Measured from housing end to housing end the measurement is approximately 31...
AvailableG4 RS riser block 3.4"
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This will keep your stock handlebar height if you add our isovibe to your G4. Good for customers who want to add our isovibe but not add any height to their handlebar stock height. Exception: Won't keep the same height on the mountain sleds.
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This...
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This will keep your stock handlebar height if you add our isovibe to your G4. Good for...
New!AvailableSalazzking Ski Rubbers
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get mushy in warm spring rides. Sold by the pair.To be used on G4 with expert beginning 2019 and all 2020 models and up. Are you tired of eternally replacing your ski dampers? The damper ejects out the back and then the ski tips straight up and stops you dead in your...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get...
