Wishlist
New products
Braces and Reinforcements There are 10 products.
AvailableG4/G5 Brace Kit Bundle
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit reinforces all the a arm mounting locations to the cast aluminum bulkhead. All braces in the kit are zinc plated steel. Comes with all necessary hardware and detailed installation instructions. Scroll to the bottom of this page for installation instructions that has pictures of the brace installed. FITS ALL G4 & G5 MODELS AND THE XU EXPEDITION ALSO FITS THE LYNX!! YOU DO...
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit reinforces all the a...
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit reinforces all the a arm mounting locations to the cast aluminum bulkhead. All braces in the kit are zinc...
AvailableG4/G5 Brace Kit
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit is to be used in addition to our G4 e module brace or BRP's e module brace. This kit reinforces all the a arm mounting locations to the cast aluminum bulkhead. All braces in the kit are zinc plated steel. Comes with all necessary hardware and detailed installation instructions. Fits G4 & G5 850 Sleds. 2018-21 Summit, Freeride, Backcountry X, and 600 RS come stock from the...
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit is to be used in...
WORKS WITH A SKID PLATE COMES WITH OUR NEW BRACE ADDITION This kit is to be used in addition to our G4 e module brace or BRP's e module brace. This kit reinforces all the a arm...
AvailableG4/G5 E Module Brace Kit
G4G5 E Module brace kit, similar to the BRP reinforcement plate but with improvements. This kit reinforces the entire area under the y pipe. The cross piece is known to break and the outside upper a arm areas can also crack. So this reinforces those areas known to fail.25% thicker aluminum than the BRP plate. G N R text cut into the center section to allow air to flow under the motor and to primary clutch area. BRP's plate completely...
G4G5 E Module brace kit, similar to the BRP reinforcement plate but with improvements....
G4G5 E Module brace kit, similar to the BRP reinforcement plate but with improvements. This kit reinforces the entire area under the y pipe. The cross piece is known to break...
AvailableG4/G5 Bulkhead...
This brace is an easy bolt in, no holes to drill. For sleds without the rack steering system. Connects the lower steering block to the bulkhead sides to add strength to the bulkhead. Made from 1/8" thick stainless steel comes with aluminum standoffs and fasteners.
This brace is an easy bolt in, no holes to drill. For sleds without the rack steering...
This brace is an easy bolt in, no holes to drill. For sleds without the rack steering system. Connects the lower steering block to the bulkhead sides to add strength to the...
AvailableG4/G5 Belly Brace/Skid...
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point and also covers the thin aluminum belly pan. Protects the vulnerable belly pan from impacts. Will fit under a plastic skid plate, installs with 3/16" rivets. This brace/skid plate has the same rivet pattern as our steel brace in our G4 front end brace kit so you can replace that steel brace with this combination brace/skid plate.
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point...
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point and also covers the thin aluminum belly pan. Protects the vulnerable belly pan from...
AvailableXRS 154 Inside Tunnel...
These inside rear tunnel braces fit the Ski Doo G4 XRS 154 sleds. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. Made of 1/8" thick aluminum and uses existing bumper bolts and included rivets for installation.
These inside rear tunnel braces fit the Ski Doo G4 XRS 154 sleds. Designed to...
These inside rear tunnel braces fit the Ski Doo G4 XRS 154 sleds. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. Made of 1/8" thick...
AvailableRPM Composites G4/G5...
THESE KITS ARE NOT IN STOCK AND WILL BE DROP SHIPPED BY RPM DUE TO HIGH DEMAND OF THIS CUSTOM MADE PRODUCT. PLEASE ALLOW 2 WEEKS FOR DELIVERY ***PLEASE PUT YEAR, EXACT MODEL, AND TRACK LENGTH OF YOUR SKIDOO IN THE COMMENTS SECTION TO ENSURE PROPER FITMENT*** Kit provides essential heavy duty protection to fragile Chain Case, Brake Rotor, and Front Cooler. Parts install by slipping guards under body panels, keeping leading edges protected and...
THESE KITS ARE NOT IN STOCK AND WILL BE DROP SHIPPED BY RPM DUE TO HIGH DEMAND OF THIS...
THESE KITS ARE NOT IN STOCK AND WILL BE DROP SHIPPED BY RPM DUE TO HIGH DEMAND OF THIS CUSTOM MADE PRODUCT. PLEASE ALLOW 2 WEEKS FOR DELIVERY ***PLEASE PUT YEAR, EXACT MODEL,...
AvailableG4/G5 Brace addition
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition to our G4 brace kit. A new piece to further strengthen the front end of the G4. Made from stainless steel and replaces the stock aluminum piece.
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for...
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition...
AvailableG4 Summit X 154 Inside...
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The long plates are made of 1/8" thick aluminum and uses existing bumper bolts and included rivets for installation. The smaller plates are made of stainless steel and bridge the weak spot next to the suspension hanger. Download the installation instructions below for more...
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X....
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The...
AvailableG4 Summit SP 154...
These inside rear tunnel braces fit the Ski Doo G4 Summit SP 154 sleds. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The long plates are made of 1/8" thick aluminum and uses existing bumper bolts and included rivets for installation. The smaller plates are made of stainless steel and bridge the weak spot next to the suspension hanger. Download the installation instructions below for more details....
These inside rear tunnel braces fit the Ski Doo G4 Summit SP 154 sleds. Designed to...
These inside rear tunnel braces fit the Ski Doo G4 Summit SP 154 sleds. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The long plates are...
