2017- Present Skidoo G4 Clutch Alignment Tools Clutch alignment is very important for belt life and performance. The standard procedure is to align the clutches with a small amount of misalignment or skew at zero load and hope when under load the motor is pulled into the correct alignment. This procedure worked okay for years but many things have changed, sleds have more torque, motor mounts have been changed to reduce vibration and the...
2017- Present Skidoo G4 Clutch Alignment Tools Clutch alignment is very important for...
2017- Present Skidoo G4 Clutch Alignment Tools Clutch alignment is very important for belt life and performance. The standard procedure is to align the clutches with a small...
SAVE $30 WHEN YOU BUY THIS KIT In this bundle you will get: G4 clutch alignment tool G4 torque stopper G4 Motor Mount Shim kit QRS 1.5mm shim kit PLEASE CHOOSE YOUR YEAR!!! THE QRS SHIM KITS ARE YEAR SPECIFIC Does not fit the 4 stroke or team clutch: we sell adaptor kits for these Works on Lynx
SAVE $30 WHEN YOU BUY THIS KIT In this bundle you will get: G4 clutch alignment tool G4...
SAVE $30 WHEN YOU BUY THIS KIT In this bundle you will get: G4 clutch alignment tool G4 torque stopper G4 Motor Mount Shim kit QRS 1.5mm shim kit PLEASE CHOOSE YOUR YEAR!!! THE...
Aluminum .062" thick shims designed to shim the motor mounts to align clutches. Kit comes with enough shims to align your clutches. Consists of: 2-Mag Mount Shim 3-Clutch Side Shims Can be used with our Red Polyurethane torque stop. Shims are designed to be used with our clutch alignment tool
Aluminum .062" thick shims designed to shim the motor mounts to align clutches. Kit...
Aluminum .062" thick shims designed to shim the motor mounts to align clutches. Kit comes with enough shims to align your clutches. Consists of: 2-Mag Mount Shim 3-Clutch Side...
This is a new polyurethane motor mount torque stop that replaces the stock O Ring style rubber torque stop. The stock torque stop has very little surface area which allows the motor to move too much under high loads. Our new torque stop is designed to have a small gap between the two aluminum mounts without any load on the motor mount. This allows the motor mounts to move around at idle and minimize vibration. Once the clutch is engaged...
This is a new polyurethane motor mount torque stop that replaces the stock O Ring style...
This is a new polyurethane motor mount torque stop that replaces the stock O Ring style rubber torque stop. The stock torque stop has very little surface area which allows the...
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue, making your drive belt run dramatically cooler and last longer.Installation is easy and detailed instructions are included. The QRS Shim kits works on all XP, XM, XS & XR sleds from 2008 to current.Fit's 2017 and 2018 Gen 4 850's does not fit 2019-20 G4s.
Many clutches are misaligned right from the factory, including my brand new 2016 800....
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue,...
Many clutches are misaligned right from the factory. This ki will allow you to shim your QRS driven clutch out by 1.5mm (.060")Installation is easy and detailed instructions are included. The QRS Shim kits works on all XP, XM, XS & XR sleds from 2008 to current. These shims can be stacked.Fit's 2017 and 2018 Gen 4's. Does not fit 2019-21s.
Many clutches are misaligned right from the factory. This ki will allow you to shim...
Many clutches are misaligned right from the factory. This ki will allow you to shim your QRS driven clutch out by 1.5mm (.060")Installation is easy and detailed instructions are...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim for a total of 1.5mm (.060") of adjustment when stacked. Allows for fine tuning the offset on your sled.Installation is easy and detailed instructions are included. These shims can be stacked.Fits 2008-2018 sleds with QRS secondary clutch.
Many clutches are misaligned right from the factory. This kit will allow you to shim...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim...
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue, making your drive belt run dramatically cooler and last longer.Installation is easy and detailed instructions are included. Fit 2019-22 G4s.
Many clutches are misaligned right from the factory, including my brand new 2016 800....
Many clutches are misaligned right from the factory, including my brand new 2016 800. We have found that most are out of alignment by 3 mm. This shim kit will correct the issue,...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out by 1.5mm (.060")Installation is easy and detailed instructions are included. These shims can be stacked.FITS 2019-22 G4
Many clutches are misaligned right from the factory. This kit will allow you to shim...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out by 1.5mm (.060")Installation is easy and detailed instructions...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim for a total of 1.5mm (.060") of adjustment when stacked. Allows for fine tuning the offset on your sled.Installation is easy and detailed instructions are included. These shims can be stacked.FITS 2019-22 G4
Many clutches are misaligned right from the factory. This kit will allow you to shim...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim...
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align...
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches....
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim