Wishlist
Best sellers
-
Hi Torque QRS Clutch Rollers
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven...
-
G4 Engine Mount Torque Stop
This is a new polyurethane motor mount torque stop that replaces the...
-
Brace Kit Bundle
These are our a arm brace kits bundled into one deal. Buy both and get a...
New products
Manufacturers
Suppliers
No supplier
Best sellers
AvailableArctic Cat Rear Spring...
Don't get stranded on the trail or the track with the breakable plastic blocks. Replace them with these unbreakable CNC machined billet aluminum blocks. Redesigned with a 10% increase in spring preload in the medium position and a 15% increase in the high position. Very light weight thru hole design. For all Arctic Cat models.SOLD AS A PAIR
Don't get stranded on the trail or the track with the breakable plastic blocks. Replace...
Don't get stranded on the trail or the track with the breakable plastic blocks. Replace them with these unbreakable CNC machined billet aluminum blocks. Redesigned with a 10%...
AvailableP Drive Clutch Tool Kit 2
Here are the tools needed to work on the P Drive primary clutch. Our Tool Kit-2 includes everything needed to take apart and reassemble the 2017 850 Primary clutch. Does not do the secondary clutch. If you need to do both clutches then you need to order p drive 3 kit. P Drive Kit-2 includes the following:Clutch HolderPuller BoltCirclip remover/installerPin removal toolCompressor with Base/Nut with handleT-25 Torx WrenchAluminum Spacer to...
Here are the tools needed to work on the P Drive primary clutch. Our Tool Kit-2...
Here are the tools needed to work on the P Drive primary clutch. Our Tool Kit-2 includes everything needed to take apart and reassemble the 2017 850 Primary clutch. Does not do...
AvailableG4 .031" Mag Side...
Aluminum .031" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
Aluminum .031" thick shim designed to shim the Mag side motor mount to align clutches....
Aluminum .031" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
AvailableG4/G5 Belly Brace/Skid...
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point and also covers the thin aluminum belly pan. Protects the vulnerable belly pan from impacts. Will fit under a plastic skid plate, installs with 3/16" rivets. This brace/skid plate has the same rivet pattern as our steel brace in our G4 front end brace kit so you can replace that steel brace with this combination brace/skid plate.
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point...
This is a 1/8" thick aluminum plate that braces your rear lower a arm mounting point and also covers the thin aluminum belly pan. Protects the vulnerable belly pan from...
AvailableQRS Shim Kit 0.5mm
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim for a total of 1.5mm (.060") of adjustment when stacked. Allows for fine tuning the offset on your sled.Installation is easy and detailed instructions are included. These shims can be stacked.Fits 2008-2018 sleds with QRS secondary clutch.
Many clutches are misaligned right from the factory. This kit will allow you to shim...
Many clutches are misaligned right from the factory. This kit will allow you to shim your QRS driven clutch out using 0.5mm (.020") thick shims. The kit includes 3 of each shim...
AvailableISO G4/G5 for adj riser
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable riser. Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side direction. The main goal for this design was to absorb the shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps with one ski. If you've even...
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable...
Fits GEN4/5 850 with forward/rearward adjustable riser. Also fits the height adjustable riser. Skidoo Isovibe SX model absorbs shock in the forward and rearward direction just...
AvailableSkidoo Pivot Stud
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style roller bolt. New genuine Skidoo part. Comes with circlip.
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style...
SOLD INDIVIDUALLY To convert the newer roll pin style bolts to the older c clip style roller bolt. New genuine Skidoo part. Comes with circlip.
AvailableG4 Clutch Side Motor...
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align...
Aluminum .062" thick shim designed to shim the Clutch side motor mounts to align clutches. Includes one shim
AvailableUpper A Arm Brace Kit
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear mounting point just like our original brace but is much easier to install. This new brace is compatible with the Skidoo QRS Tech Link and Racewerx clutch tower brace. As many of you know the A Arm mounting points can bend from impact before the A Arms bend causing expensive repair. The A Arm should bend before the chassis so you can change an A Arm instead of...
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear...
New redesigned brace for 2015. This kit is designed strengthen the upper A Arm rear mounting point just like our original brace but is much easier to install. This new brace...
AvailableG4 .062" Mag Side...
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches....
Aluminum .062" thick shim designed to shim the Mag side motor mount to align clutches. Includes one shim
AvailableIsoVibe SX Procross...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser block New Isovibe SX model designed for snowcross racers and aggressive trail/standup riders. SX bushing design absorbs vibration just like the original Isovibe but takes shock absorption to a new level. The new design absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser...
Isovibe SX for New 2012-present Arctic Cat Procross/Proclimbs with stock aluminum riser block New Isovibe SX model designed for snowcross racers and aggressive trail/standup...
AvailableG4/G5 Brace addition
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition to our G4 brace kit. A new piece to further strengthen the front end of the G4. Made from stainless steel and replaces the stock aluminum piece.
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for...
This brace piece comes in our g4 brace kit and bundle kit. Sold separately for customers that had bought our kit before we included this new piece. This is a new brace addition...
