Skidoo

New Isovibe SX model designed for snowcross racers and aggressive trail/standup riders. New bushing design absorbs vibration just like the original Isovibe but takes shock absorption to a new level. The new design absorbs shock in the forward and rearward direction just like the original design but now absorbs shock in the vertical and side to side direction.

The main goal for this design was to absorb the shock normally transferred to your wrists, shoulders and arms when landing jumps or hitting hard bumps with one ski. If you've even landed a jump wrong on one ski you've experienced the side to side impact to your wrists that sometimes rips the bars out of your hands. This new Isovibe SX will absorb this impact and keep you in control.

The Isovibe SX has the following features:

• Will raise your bars by 1.5" or 2.5" over stock depending on how you mount it. If you want to keep your stock handle bar height shorter riser blocks are available from your dealer.
• Retains the ability to articulate your bars forward or rearward.
• Adjustable handle bar deflection - simply add or remove shims between the bushings to increase or decrease the side to side deflection. Add or remove shims on the top and bottom sides of the bushings to increase or decrease the front to back deflection. Optional durometer bushings will be available to fine tune your Isovibe SX to your personal preference

Fits all Skidoo models and X package sleds that come with a Skidoo factory aluminum riser block.

Skidoo has two different risers blocks, one designed for 7/8" diameter bars and one for 1 1/8" diameter bars. Our ISO-SDOOSX fits risers with the standard 7/8" diameter bars, and our ISO-SDFRSX fits the 1 1/8" bar riser block found on Freerides and some other 2012 and 13 models. Measure the diameter of your handle bars where it clamps to the riser block to determine which Isovibe to order.

We are now stocking both Isovibe models clear annodized that are aluminum colored or powder coated black to match black riser blocks. Chose your color below.

Not compatible with aftermarket riser blocks, designed to work with factory aluminum risers

1st and 2nd place teams in 2009 Cain's Quest race equipped with Isovibe SX, many teams also run them in the Iron Dog race in Alaska.

Won't fit sleds with an old style steering post plate.