Wishlist
New products
Ski-doo XP, XS, XM, XR Products There are 47 products.
AvailableTool Caddy
Fits nicely in the rear seat or the glove box. A quality hard zippered case includes the following:8, 10, 12, & 13 mm wrenches.30 inch telescoping magnet with 20 lb. lift capacity.20 - 8 inch zip ties.15 foot roll of duct tape.1/4 inch ratchet.1/4 inch Driver.1/4 inch T25 & 40 torx sockets.1/4 inch phillips & flat tip sockets.1/4 inch universal joint.The Torx sockets fit many of the screws used on...
Fits nicely in the rear seat or the glove box. A quality hard zippered case...
Fits nicely in the rear seat or the glove box. A quality hard zippered case includes the following:8, 10, 12, & 13 mm wrenches.30 inch telescoping magnet with 20...
AvailableBRP RH Deflector
New in bag BRP RH deflector.
New in bag BRP RH deflector.
New in bag BRP RH deflector.
AvailableBRP Rail Ice Scratchers
Provide additional lubrication in hard and icy conditions.Rail mounted, small, light. Design expands on coil concept to allow reversing without damage. Easily stored when not in use. REV Gen4, XM, XP Summit & Freeride Fits Lynx models:Rave RE 600R E-TEC 2021 - 2022Rave RE 850 E-TEC 2021 - 2022Rave Enduro 600R E-TEC 2021 - 2022BoonDocker 3900 600R E-TEC 2021 - 2022BoonDocker RE 3700 850 E-TEC 2021 - 2022Boondocker...
Provide additional lubrication in hard and icy conditions.Rail mounted, small,...
Provide additional lubrication in hard and icy conditions.Rail mounted, small, light. Design expands on coil concept to allow reversing without damage. Easily stored when not...
AvailableIsoVibe Old Style...
Standard older style bushings for our original first version IsoVibe. Bushings are 80 durometer. Sold as set of 4. Does NOT fit on the newer Isovibe SX. We also have isovibe SX bushings available.
Standard older style bushings for our original first version IsoVibe. Bushings are 80...
Standard older style bushings for our original first version IsoVibe. Bushings are 80 durometer. Sold as set of 4. Does NOT fit on the newer Isovibe SX. We also have isovibe SX...
AvailableQRS Bearing Puller
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS Secondary Clutches from 2008 to current Ski-Doo snowmobiles. The threaded rod IS NOT included with this bearing puller. Customer will need to purchase the threaded rod, nuts & washers. By doing this, the customer will save on the increased shipping charges. Detailed instructions on what to purchase as well as bearing removal are included. The...
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS...
The QRS Bearing Puller is used to remove and install the Shaft Bearing on all QRS Secondary Clutches from 2008 to current Ski-Doo snowmobiles. The threaded rod IS NOT...
AvailableSkidoo 4th Wheel Kit
This kit includes 4 of our billet aluminum rear axle wheel spacers, the 180mm BRP wheel ,seals and an axle spacer. Don't let a rear axle wheel failure ruin your day. Riders need all four wheels on the rear ale for the greatest durability, especially if you run studs or are landing on the rear of your sled. This 4th wheel kit is for the Ski-Doo trail and crossover sleds that run the 180mm wheels. Our kit comes with 4 billet aluminum rear axle...
This kit includes 4 of our billet aluminum rear axle wheel spacers, the 180mm BRP wheel...
This kit includes 4 of our billet aluminum rear axle wheel spacers, the 180mm BRP wheel ,seals and an axle spacer. Don't let a rear axle wheel failure ruin your day. Riders need...
AvailableH4 SII High...
Skidoo 2008+(Not Gen4) = H4 kit The newly released Alpha 2022 kit is the brightest LED kit on the market. The Alpha kit puts out a whopping 13000lm from it's 16 Custom CSP Diodes driven at 130 Watts! The 2022 revision is 30 watts more powerful and 2000LM brighter than the previous popular Alpha Gen 3 kit. These kits are unreal, our Alpha kit has been the most popular kit since it's release in 2018. The newly released Alpha 2022 kit is our...
Skidoo 2008+(Not Gen4) = H4 kit The newly released Alpha 2022 kit is the brightest LED...
Skidoo 2008+(Not Gen4) = H4 kit The newly released Alpha 2022 kit is the brightest LED kit on the market. The Alpha kit puts out a whopping 13000lm from it's 16 Custom CSP...
AvailableQRS Ratchet Wrench
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to current ski doo secondary clutches without the need to remove your secondary clutch/shaft. The wrench is just over 12 inches long and has a ratchet on each end. The end is 12 mm. The opposite end is 13 mm. The wrench includes a T-40 torx bit that will not fall out of the wrench.
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in...
QRS Ratchet Wrench is perfect for changing the helix, spring or secondary rollers in the 2008 to current ski doo secondary clutches without the need to remove your secondary...
AvailableTorx Bit for QRS...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in place on all QRS Secondary Clutches. Fits all 6 point & 12 point - 12 MM wrenches and sockets. The Torx Bit has a tension ball that holds it firmly in the wrench or socket. Will not fall out. This bit is used for changing secondary rollers, helix and spring without the need to remove the secondary shaft. NOTE: Wrench shown is not included, but can be...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in place on all QRS Secondary Clutches. Fits all 6 point & 12 point - 12 MM wrenches and...
AvailableQRS Shaft Bearing
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the...
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
AvailableDrive Shaft Bearing
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on both sides of the drive shaft. Brake side and chain case side.Sold individually.
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on...
Drive Shaft Bearing fits all 2008 -2023 Ski Doo models.The same bearing is used on both sides of the drive shaft. Brake side and chain case side.Sold individually.
