Wishlist
Best sellers
-
Hi Torque QRS Clutch Rollers
For 2008-to present Skidoo XP/XS/XM & G4/G5 QRS Driven...
-
G4 Engine Mount Torque Stop
This is a new polyurethane motor mount torque stop that replaces the...
-
Brace Kit Bundle
These are our a arm brace kits bundled into one deal. Buy both and get a...
New products
Manufacturers
Suppliers
No supplier
Best sellers
AvailableG4/G5 RS Upper A Arm...
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory plastic ones. These are for the Race Sled and only fit the upper a arms. Precision machined to fit with no modifications to A-arms or sleeve bushings. Removes all the slop in the front A-arms providing more precise handling. Made in the USA by Snow Shooters.
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory...
A set of 8 UPPER ONLY custom made Oil-lite bronze bushings to replace the cheap factory plastic ones. These are for the Race Sled and only fit the upper a arms. Precision...
AvailableTorx Bit for QRS...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in place on all QRS Secondary Clutches. Fits all 6 point & 12 point - 12 MM wrenches and sockets. The Torx Bit has a tension ball that holds it firmly in the wrench or socket. Will not fall out. This bit is used for changing secondary rollers, helix and spring without the need to remove the secondary shaft. NOTE: Wrench shown is not included, but can be...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in...
The T-40 Torx Bit works perfect for removing the 4 torx bolts that hold the helix in place on all QRS Secondary Clutches. Fits all 6 point & 12 point - 12 MM wrenches and...
AvailableP Drive Clutch Holder
This new style clutch holder fits all p drive clutches from 2017-present. Fits the new 2023 models that have closed windows on their clutch. Please see pics of "closed window" Second picture is an example of a closed window Third picture is an example of an open window
This new style clutch holder fits all p drive clutches from 2017-present. Fits the new...
This new style clutch holder fits all p drive clutches from 2017-present. Fits the new 2023 models that have closed windows on their clutch. Please see pics of "closed window"...
Available3 pin male to a 2 pin...
Power splitter for your G5 style accessory power plug located under the dash above the secondary clutch. This splitter plugs into your accessory power plug with a 3 pin male plug and splits into a 2 pin female and a 3 pin female plug. This allows you two plug a 2 pin accessory plug and a new G5 style 3 pin plug accessory.
Power splitter for your G5 style accessory power plug located under the dash above the...
Power splitter for your G5 style accessory power plug located under the dash above the secondary clutch. This splitter plugs into your accessory power plug with a 3 pin male...
AvailableBRP Rail Ice Scratchers
Provide additional lubrication in hard and icy conditions.Rail mounted, small, light. Design expands on coil concept to allow reversing without damage. Easily stored when not in use. REV Gen4, XM, XP Summit & Freeride Fits Lynx models:Rave RE 600R E-TEC 2021 - 2022Rave RE 850 E-TEC 2021 - 2022Rave Enduro 600R E-TEC 2021 - 2022BoonDocker 3900 600R E-TEC 2021 - 2022BoonDocker RE 3700 850 E-TEC 2021 - 2022Boondocker...
Provide additional lubrication in hard and icy conditions.Rail mounted, small,...
Provide additional lubrication in hard and icy conditions.Rail mounted, small, light. Design expands on coil concept to allow reversing without damage. Easily stored when not...
Available3 pin male to 2 of the...
Power splitter for your G5 style accessory power plug located under the dash above the secondary clutch. This splitter plugs into your addessory power plug with a 3 pin male plug and splits into two plugs with 3 female pins. This allows you two plug in 2 different accessories that use the new G5 3 pin plugs.
Power splitter for your G5 style accessory power plug located under the dash above the...
Power splitter for your G5 style accessory power plug located under the dash above the secondary clutch. This splitter plugs into your addessory power plug with a 3 pin male...
AvailableBRP USB Power Outlet Kit
Plug-and-play installation.Provides clean, stable power to recharge your electronics while riding. Dual USB ports. Includes wiring harness.
Plug-and-play installation.Provides clean, stable power to recharge your electronics...
Plug-and-play installation.Provides clean, stable power to recharge your electronics while riding. Dual USB ports. Includes wiring harness.
AvailableG4 Summit X 154 Inside...
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The long plates are made of 1/8" thick aluminum and uses existing bumper bolts and included rivets for installation. The smaller plates are made of stainless steel and bridge the weak spot next to the suspension hanger. Download the installation instructions below for more...
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X....
DOES NOT FIT THE EXPERT These inside rear tunnel braces fit the Ski Doo G4 Summit X. Designed to strengthen the rear tunnel for hauling large loads in rough conditions. The...
AvailableQRS Shaft Bearing
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the...
Replacement bearing for the QRS secondary shaft. This is the same exact bearing as the OEM. Fits All XP,XM,XS & XR 1200 models from 2008-current Item #: 6008V
New!AvailableSalazzking Ski Rubbers
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get mushy in warm spring rides. Sold by the pair.To be used on G4 with expert beginning 2019 and all 2020 models and up. Are you tired of eternally replacing your ski dampers? The damper ejects out the back and then the ski tips straight up and stops you dead in your...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged...
DOES NOT FIT THE LYNX SOLD AS A PAIR The best ski stop available, tested in the rugged Rocky Mountains. Polyurethane material won’t freeze up in sub zero temps and doesn’t get...
AvailableG4 RS riser block 3.4"
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This will keep your stock handlebar height if you add our isovibe to your G4. Good for customers who want to add our isovibe but not add any height to their handlebar stock height. Exception: Won't keep the same height on the mountain sleds.
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This...
Genuine BRP riser part # 506153061 G4 3.4" riser block. Fits all Skidoo G4 chassis This will keep your stock handlebar height if you add our isovibe to your G4. Good for...
AvailableTeam clutch adaptor
This is an adaptor for our clutch alignment tool to use if you have a team clutch on your G4.
This is an adaptor for our clutch alignment tool to use if you have a team clutch on...
This is an adaptor for our clutch alignment tool to use if you have a team clutch on your G4.
